Yaocom 2 Pcs Aluminum Attic Vents 10" x 10" Metal Gable Wall Mesh Shed Vent with Screen Review (2026)

What you get in the box

This listing ships two identical vents, each about 10 x 10 inches, built from aluminum rod and finished in black. Amazon's listing for this exact item states the pair weighs 14.24 ounces combined and includes 16 screws, enough for eight per vent, so no separate hardware run is needed before mounting day. Because the pack contains two matching vents rather than one, it suits coops where the builder wants an intake low on one wall and an exhaust high on the opposite gable, which is the setup most ventilation guides recommend for moving stale air out without creating a direct draft on roosting hens. Buyers who only need a single opening, or who need a non-standard size, should check the listing's other size options before ordering, since this particular pack is sized specifically for 10 x 10 inch openings.

Build quality and finish

The vent body is aluminum rather than the painted steel or plastic used on many budget shed vents, which matters outdoors where humidity and droppings speed up corrosion. The manufacturer describes a smooth, flat face with a chamfered edge, aimed more at curb appeal than raw function, but it also means there are fewer rough edges to catch feathers or bedding during cleaning. A mesh screen is built into the frame rather than added as a separate strip, which keeps it from peeling loose the way stapled-on hardware cloth sometimes does. The listing markets the vent for attics, garages, and sheds first and coops second, which lines up with the fact that it is not marketed as a purpose-built poultry product, just a general gable vent that happens to fit common coop framing dimensions.

Installing it on a coop wall

Because this is an attic vent rather than a dedicated coop accessory, it is designed to sit in a pre-cut square opening rather than clip onto raw plywood, so most coop builds will need a framed 10 x 10 inch hole or a trim ring to get a clean fit. The included screws handle the final mounting once the opening is framed, and the flat face means it can be caulked or sealed around the edge if the coop wall is thinner than a standard stud bay. Builders retrofitting an existing coop should measure the wall thickness before ordering, since gable vents made for full-depth exterior walls can look proud or recessed on the thinner panels many prefab coops use. This is a straightforward job for anyone comfortable with a jigsaw, but it is not a drop-in part for an unframed hole.

Airflow and pest control

The core job of any gable vent is passive airflow, and the built-in mesh screen is what keeps that airflow from doubling as an entry point for mice, wasps, or larger pests looking for a way into the coop. Two vents per pack lets a keeper place one low and one high, or one on each end wall, which improves the stack effect that pulls warm, moist air out during humid summer nights. The trade-off is that this vent has no shutter or slide to reduce airflow, so it stays fully open in every season unless the keeper adds their own cover. In a hot climate or a well-insulated coop that needs help drying out ammonia and moisture, that constant airflow is a plus; in a cold, exposed coop it can contribute to drafts at roost height if placed too close to where birds sleep.

Who this vent suits

This pack fits keepers who already have a plan for the 10 x 10 inch opening and want a rust-resistant, mesh-screened vent to finish it, especially if they want two matching vents on opposite walls. It is a weaker fit for anyone who wants a single all-in-one kit with framing included, or who needs to seal the coop tight for freezing weather, since there is no closable damper. Given the aluminum build and pest-blocking mesh, it is reasonably priced for what a keeper gets, but shoppers who need an adjustable vent for four-season use should look at louvered coop windows instead. Overall, treat this as a ventilation component to combine with your own framing rather than a complete coop window replacement.

Frequently asked questions